Rapido Trains UK have announced they are to produce the Class 45 and Class 46 in N Gauge as a follow on to their previously announced Class 44 'Peak' locomotive.
New N Gauge BR 1Co-Co1 Class 45 and Class 46. Both are available directly from Rapido Trains UK, and our Official Retailers.
One of our most-requested N Gauge locos to date.
Liveries covering their history from construction through to preservation.
Directional lighting.
Next18 decoder socket.
High-quality motor and drive mechanism for smooth running.
NEM coupler pockets.
Numerous separately fitted parts including handrails and wipers.
Etched radiator fan grill.
High quality speaker pre-fitted
Available to pre-order now!
In much the same way as the locos were produced in real-life, the development of the Rapido Trains N Gauge Class 45 and 46 has progressed as a continuation from the Class 44. To streamline the process and save time in production, Rapido included the research, development, and tooling for all three classes when they began development of the Class 44s. That gave them the freedom to announce the arrival of these locos somewhat sooner than they would have done for other models in their range.
With the success of the first Type 4 diesels, Derby Works began the development of the next generation of even more powerful locomotives, the Class 45 and Class 46. These would go on to form the bulk of the Midland mainline fleet for many years.
Despite the 45s and 46s not being named after mountains as their Class 44 counterparts had been, many were honoured with the names of famed British Army Regiments, however, they still retained the nickname ‘Peaks’.
The Class 45 and 46s were pretty much identical to the 44s, also weighing in at around 135 tonnes and powered by a diesel power unit produced by Swiss engineering company, Sulzer. However, the newer power units produced 2500 horsepower, 200 more than their predecessor.
This led to BR placing a more substantial order of 127 locos for Class 45s, this was so many in fact, that Crewe Works were also drafted in to assist Derby with their construction.
The first BR Class 45 entered service in late 1960, with the class soon becoming the main loco to work out of St Pancras on the Midland Line services, demoting the dwindling number of steam locos to cover local services or freight.
The final variant of the ‘Peak’ began production in 1961, now with Brush Electrical Equipment fitted after re-tendering for the next batch of locomotives. This tweaked peak would be known as the BR Class 46.
Externally it looked almost identical, as it had the same engine and body, however, its electrical equipment had received an upgraded generator and different traction motors. Developed by the Brush Company of Loughborough these upgrades replaced the previously used Crompton-Parkinson electrical equipment of the Class 44 and 45. In total, 56 Class 46 locomotives were produced, with the last being built in 1963.
The 45s were intended to be allocated to multiple regions during their construction and this was initially the case with locomotives allocated to London Midland and Western Region sheds as well as other regions for short stints of training. They soon settle down to more regular work on Midland Mainline and Western Region services. The 46s were used for more varied work, being seen on NE-SW cross-country services, long distance freights from the West Country and some Trans-Pennine services.
With Class 45s and 46s often being seen working trains to destinations across the Southwest and alongside the iconic trainspotting location of Dawlish it's no wonder the loco has a soft spot in many diesel enthusiasts' hearts.
With the introduction of the HSTs on the Midland Mainline and Cross Country routes, as well as the introduction of Class 56s to Coal traffic, the 45s were moved to the Trans-Pennine route to work passenger services across the north of the country.
The aging fleet of well-travelled ‘Peaks’ started to be withdrawn throughout the 1980s. The last of the 44s were withdrawn in 1980, the 46s in 1984, and the final 2 Class 45s soldiered on until 1989. The last ‘Peak’, No.45106, was painted into an approximation of the original BR Green livery and regularly worked the 17:50 St Pancras – Derby service as well as a number of railtours. It sealed the fate of the class with an onboard fire after it failed at Wellingborough with a fuel leak, the ignition presumed to be from brake sparks while being towed dead, which sadly resulted in its inevitable retirement.
Prior to retirement, the class did have one final claim to fame. Class 46 No.46009 was acquired by the BR Research department, to be used in an upcoming crash test. This famous and very public experiment would see BR test, under crash conditions, the integrity of its supposedly impenetrable Nuclear Flasks.
On July the 17th 1984, the loco and its train were allowed to run out of control along the old Derby Test Track. With the train approaching its top speed, it crashed into a waiting nuclear flask wagon that had been positioned across the track. Unsurprisingly, the loco swiftly expired in the name of science, exploding in an impressive ball of flames and debris. The infamous footage taken on that day would be lapped up by railway enthusiasts across the world for many years to come.
Not all of the remaining ‘Peaks’ were used as test subjects, and we can be thankful that a number of these locos would sit waiting to be scrapped until 1994, giving budding enthusiasts the perfect opportunity to preserve them. Incredibly 2 44s, 12 class 45s, and 3 class 46s were saved for preservation.
The Rapido Trains UK N Gauge BR 1Co-Co1 Class 45 and Class 46 models have been designed using a combination of archival materials and drawings. They will be available in a variety of liveries covering the loco's almost 30-year mainline tenure, and several as preserved examples too.
In addition to a high-quality motor and drive mechanism for smooth running, a Next18 Decoder Socket, and NEM Coupler pockets, modelers can look forward to directional lighting, an etched radiator fan grill and lots of other separately fitted parts including wipers.
Samples have been received for the ‘Peaks’ and the order book is open. You can pre-order yours directly from www.rapidotrains.co.uk or from any of the official Rapido retailers.
N Gauge BR 1Co-Co1 Class 45
SKU 948101: D120 BR Green
SKU 948102: D99 ‘3rd Carabinier’ BR Green
SKU 948103: D63 ‘Royal Inniskilling Fusilier’ BR Green
SKU 948104: D92 BR Early Blue
SKU 948105: 49 ‘The Manchester Regiment’ BR Blue
SKU 948106: 45123 ‘The Lancashire Fusilier’ BR Blue
SKU 948107: 45108 BR Blue
SKU 948108: 45060 ‘Sherwood Forrester’ BR Blue
SKU 948109: 45111 ‘Grenadier Guardsman’ BR Blue
SKU 948110: 45022 ‘Lytham St Annes’ BR Blue
SKU 948111: 45115 ‘Apollo’ BR Blue
SKU 948112: 45106 BR Heritage Green
N Gauge BR 1Co-Co1 Class 46
SKU 948201: D140 BR Green
SKU 948202: D182 BR Green
SKU 948203: D138 BR Green
SKU 948204: 46026 ‘Leicestershire and Derbyshire Yeomanry’ BR Blue
SKU 948205: 46037 BR Blue
SKU 948206: 46010 BR Blue
SKU 948207: 97403 ‘Ixion’ RTC Blue/Red
Pricing for the Class 45 and Class 46 is RRP £144.95 DCC Ready with all versions also available sound fitted for an RRP of £249.95
For more information visit the Rapido Trains UK website
Comments